Axis E100 User Manual page 55

Note:
AXIS StorPoint CD E100 User's Manual
Example (NDS settings):
The StorPoint CD is placed in Eastern United States. The name of your
NDS tree is ACMECORP, the name of the context where you wish to
install the StorPoint CD is Corp.Acme, and the administrator's name is
Admin.Acme. Specify these parameters:
[Server]
TimeZone
TimeSyncSource
...
[NetWare]
IPXEnable
PureIPEnable
NDSEnable
NDSTreeName
NDSServerContext
NDSAdminName
NDSAdminPassword
NDSInstall
NDSRightsStorage
TimeSyncSources
5. Save the
config.ini
takes about 15 seconds, after which users will be able to access the StorPoint
CD in NDS mode.
6. Check the
logfile.txt
installed. See "Installation Errors in NetWare NDS" on page 56.
7. After the installation you must logout and then login again to have all the
necessary rights on the StorPoint CD server object and the associated volume.
Using the NWAdmin, you will find a new server object and corresponding
volume object in the context you chose above.
The StorPoint CD installed in the NDS Tree
You can display Details in NWAdmin to verify the syntax of the


NDSServerContext
= US_CAN_Eastern
= NDS
= yes
= no
= yes
= ACMECORP
= Corp.Acme
= Admin.Acme
= secret
= install
= NDS
= SAP
file to start the NDS server installation. The installation
file to verify that the StorPoint CD was successfully
and parameters.
NDSAdminName
Section 4: NetWare (NCP)
55