Axis E100 User Manual page 113

Parameter name
NTDomainInstallation
EnableNBT
NBTscopeID
EnableNetBEUI
NetBEUIFrameType
[NFS]
NFSEnable
DefaultUid
PCNFSDAuthentServer
ExportVolumes
LowerNonCase
[SNMP]
GetCommunityName
TrapDestination
TrapCommunityName
SystemContact
SystemName
SystemLocation
AuthenticationTrap
[NetWare]
NWEnable
IPXEnable
Frame_802.2
Frame_802.3
Frame_EthernetII
Frame_SNAP
NetWareIP_Enable
NetWareIP_DSS_Server
PureIPEnable
ServerName
InternalNetAddress
BurstMode
ShowAllVolumes
BinderyEnable
BindAuthentication
NDSEnable
NDSTreeName
NDSServerContext
AXIS StorPoint CD E100 User's Manual
Value Description
Set to yes when you want to install the StorPoint CD in an NT
= no
domain.
Enables SMB over NetBIOS/TCP/IP.
= yes
Defines the NetBIOS scope to which the StorPoint CD belongs.
=
= yes Enables SMB over NetBIOS/NetBEUI.
= auto If set to auto, 802.2 or DIX will automatically be selected by
scanning the network. If required, the frame type can also be set to
either 802_2 or dix.
Enables NFS.
= yes
= -2 Default user id to be used when authenticating PCNFSD clients.
Disable by setting the parameter to 0 (zero).
The IP address of the PCNFSD authentication server used for
= 0.0.0.0
authenitcating PCNFSD clients. The default 0.0.0.0 disables the
function.
Enables export of each new disc inserted as a mount point. If you
= yes
restore the factory default settings, all the currently inserted discs
will be exported.
= yes Set to yes to displays non-case sensitive file systems in lower case.
Specifies the community that has read only access to all supported
= public
SNMP objects except writeCommunity, SupervisorPassword and
ftpPassword. It corresponds to the readCommunity SNMP object.
= 0.0.0.0 Specifies the IP address which SNMP traps are sent to. It
corresponds to the trapAddress SNMP object. Default is 0.0.0.0,
i.e. all SNMP traps are disabled.
= public Specifies the community for all generated SNMP traps. It
corresponds to the trapCommunity SNMP object.
Optional entry which should be in plain text and may be used to
=
show the name of the system contact person.
Optional entry which should be in plain text and may be used to
=
show the name of the location of the system.
Optional entry which should be in plain text and may be used to
=
show the name of the location of the system.
Disables the SNMP authentication failure traps. It corresponds to
= disabled
the snmpenableAuthenTraps (MIB-II) SNMP object.
= yes Enables NetWare support.
Enables the IPX protocol.
= yes
Enables the 802.2 frame type.
= auto
Enables the 802.3 frame type (Ethernet versions only).
= auto
Enables the Ethernet II frame type (Ethernet versions only).
= auto
Enables the SNAP frame type.
= auto
Enables NCP over IPX/UDP (NetWare/IP).
= no
The IP address of the DSS server.
=
= yes Enables NCP over TCP/IP (PureIP).
= AXIS<nnnnnn>_NW NetWare server name to be presented to the NetWare clients.
Default is AXIS<nnnnnn>_NW where nnnnnn are the last six digits
of the serial number.
Internal network address. Default is nn-nn-nn-nn where nnnnnnnn
= nn-nn-nn-nn
are the last eight digits of the serial number.
Enables burst mode.
= on
Shows all drives and discs also at SYS level.
= yes
Enables bindery mode login. When using NDS, set to no to increase
= yes
system security. The Supervisor can always login in bindery mode
even if this parameter is set to no.
= Name or IP address of the server used for authenitcating clients.
Enables NDS mode.
= yes
Name of the tree where you wish to install the StorPoint CD.
=
Distinguished name of the context in the NDS tree where you wish
=
to install the StorPoint CD, e.g. Corp.Acme.
Appendix A: Parameter List
113