Axis Thinwizard - Axis StorPoint NAS 100 User Manual

StorPoint NAS 100 User's Manual

AXIS ThinWizard

Note:
Installing AXIS
ThinWizard
Accessing AXIS
ThinWizard
Section 11: Monitoring the StorPoint NAS
AXIS ThinWizard provides a convenient interface for locating and
managing all the AXIS servers on your network. AXIS ThinWizard runs
on Windows NT, Windows 95/98 and UNIX.
❏ AXIS ThinWizard requires the IP address of your StorPoint NAS to
be set. Refer to "Assigning an IP Address" on page 13.
The AXIS ThinWizard is included on the AXIS Online CD. The
required software can also be downloaded from the Axis Web Site free
of charge. An installation wizard will guide you through the installation
procedures.
Follow these steps to access the AXIS ThinWizard:
1. Make sure an AXIS ThinWizard server is running on your network.
2. Start the Web browser and enter the name or IP address of the AXIS
ThinWizard server in the location/address field. If the AXIS
ThinWizard server is installed on a port other than port number 80,
you must add the port number to the URL:
http://<IP address>:<port number>/
Example:
http://192.16.253.80:8011/
3. The AXIS ThinWizard start page appears.
71