Windows Nt 4.0 Chipset Drivers Installation; Ati M6 Vga Driver Installation; Pci Ethernet Drivers Installation - Intel Xeon E7500 User Manual

Hide thumbs Also See for Xeon E7500:

Table of Contents

DRIVERS INSTALLATION

Windows NT 4.0 Chipset Drivers Installation

To install the ATI Radeon M6 Graphics drivers for Windows NT 4.0,

please follow the same procedure as shown in the ATI M6 VGA Driver

Installation for Windows 2000/XP in the previous section.

The first thing to do to install the Ethernet drivers is to create floppy

diskettes that would contain the drivers. Run the batch file in the CD in

the directory Lan\Intel\Driver\WinNT4\MakeDisk\MAKENT.bat under

Windows to create the diskettes.

After creating the Ethernet drivers floppy diskettes, follow the steps

below.

1. Under the Windows NT 4.0 environment, click Start à Control Panel.

Double click Network à Adapters à Add.

2. Select "Have disk ... " and insert the floppy diskette containing the

Ethernet drivers for Windows NT 4.0 into the FDD drive, then click OK.

3. Click OK à Close, and then enter IP address.

4. Restart the system for changes to take effect.

IB900 User' s Manual

Table of Contents

Table of Contents

Xeon e7501