Common Notations In Multicast; Advantages And Applications Of Multicast - HP 4800G Series Configuration Manual

For a better understanding of the multicast concept, you can assimilate multicast transmission to the
transmission of TV programs, as shown in
Table 1-1 An analogy between TV transmission and multicast transmission
TV transmission
A TV station transmits a TV program through
a channel.
A user tunes the TV set to the channel.
The user starts to watch the TV program
transmitted by the TV station via the channel.
The user turns off the TV set or tunes to
another channel.

Common Notations in Multicast

Two notations are commonly used in multicast:
(*, G): Indicates a rendezvous point tree (RPT), or a multicast packet that any multicast source
sends to multicast group G. Here "*" represents any multicast source, while "G" represents a
specific multicast group.
(S, G): Indicates a shortest path tree (SPT), or a multicast packet that multicast source S sends to
multicast group G. Here "S" represents a specific multicast source, while "G" represents a specific
multicast group.
For details about the concepts RPT and SPT, see PIM Configuration or IPv6 PIM Configuration in the IP
Multicast Volume.

Advantages and Applications of Multicast

Advantages of multicast
Advantages of the multicast technique include:
Enhanced efficiency: reduces the CPU load of information source servers and network devices.
Optimal performance: reduces redundant traffic.
Distributive application: enables point-to-multipoint applications at the price of minimum network
resources.
Applications of multicast
Applications of the multicast technique include:
Multimedia and streaming applications, such as Web TV, Web radio, and real-time video/audio
conferencing.
Communication for training and cooperative operations, such as distance learning and
telemedicine.
Table 1-1.
Multicast transmission
A multicast source sends multicast data to a
multicast group.
A receiver joins the multicast group.
The receiver starts to receive the multicast data that
the source is sending to the multicast group.
The receiver leaves the multicast group or joins
another group.
1-5