Bgp Configuration Task List - HP 4800G Series Configuration Manual

For information about the VPN extension application, refer to MCE Configuration in the IP Routing
Volume.
For information about the IPv6 extension application, refer to IPv6 BGP Configuration in the IP
Routing Volume.
This chapter gives no detailed commands related to any specific extension application in MP-BGP
address family view.
Protocols and Standards
RFC1771: A Border Gateway Protocol 4 (BGP-4)
RFC2858: Multiprotocol Extensions for BGP-4
RFC3392: Capabilities Advertisement with BGP-4
RFC2918: Route Refresh Capability for BGP-4
RFC2439: BGP Route Flap Damping
RFC1997: BGP Communities Attribute
RFC2796: BGP Route Reflection
RFC3065: Autonomous System Confederations for BGP
draft-ietf-idr-restart-08: Graceful Restart Mechanism for BGP

BGP Configuration Task List

Complete the following tasks to configure BGP:
Configuring BGP Basic
Functions
Controlling Route
Generation
Controlling Route
Distribution and
Reception
Task
Creating a BGP Connection
Specifying the Source Interface for TCP
Connections
Allowing Establishment of eBGP Connection
to a Non Directly Connected Peer/Peer
Group
Injecting a Local Network
Configuring BGP Route Redistribution
Enabling Default Route Redistribution into
BGP
Configuring BGP Route Summarization
Advertising a Default Route to a Peer or Peer
Group
Configuring BGP Route
Distribution/Reception Filtering Policies
Enabling BGP and IGP Route
Synchronization
Limiting Prefixes Received from a Peer/Peer
Group
1-16
Remarks
Required
Optional
Optional
Required to choose
either.
Optional
Optional