Bgp Configuration Task List - HP HPE FlexNetwork 7500 series Configuration Manual

Table of Contents

Advertisement

RFC 5082, The Generalized TTL Security Mechanism (GTSM)
RFC 6037, Cisco Systems' Solution for Multicast in BGP MPLS IP VPNs

BGP configuration task list

On a basic BGP network, perform the following configuration tasks:
Enable BGP.
Configure BGP peers or peer groups. If you configure a BGP setting at both the peer group and
the peer level, the most recent configuration takes effect on the peer.
Control BGP route generation.
To control BGP route distribution and path selection, you must perform additional configuration
tasks.
To configure BGP, perform the following tasks (IPv4 unicast/IPv4 multicast):
Tasks at a glance
Configuring basic
(Required.)
(Required.) Perform one of the following tasks:
Configuring a BGP peer
Configuring dynamic BGP peers
Configuring a BGP peer group
(Optional.)
Perform at least one of the following tasks to generate BGP routes:
Injecting a local network
Redistributing IGP routes
(Optional.)
Controlling route distribution and
Configuring BGP route summarization
Advertising optimal routes in the IP routing table
Advertising a default route to a peer or peer group
Configuring BGP to first send updates of the default route
Limiting routes received from a peer or peer group
Configuring BGP route filtering policies
Setting the BGP route sending rate
Configuring BGP route update delay
Configuring a startup policy for BGP route updates
Configuring BGP route dampening
(Optional.)
Controlling BGP path
Setting a preferred value for routes received
Configuring preferences for BGP routes
Configuring the default local preference
Configuring the MED attribute
Configuring the NEXT_HOP attribute
Configuring the AS_PATH attribute
Ignoring IGP metrics during optimal route selection
Configuring the SoO attribute
BGP:
Enabling BGP
Specifying the source address of TCP connections
selection:
reception:
208
Remarks
As a best practice,
configure BGP peer
groups on large scale
BGP networks for easy
configuration and
maintenance.
N/A
BGP cannot advertise
optimal routes in the IP
routing table for IPv4
multicast address
family.
N/A

Advertisement

Table of Contents
loading

Table of Contents