HP 4800G Series Configuration Manual page 213

To do...
Map the original CVLAN and the new SVLAN
to the new CVLAN by associating the traffic
class with the traffic behavior
Exit to system view
Table 1-5 Configure an uplink policy for the downlink port
To do...
Enter system view
Create a class and enter class view
Specify the original CVLAN for the
VLAN mapping
Specify the original SVLAN for the
VLAN mapping
Exit to system view
Create a traffic behavior and enter
traffic behavior view
Specify the new SVLAN used for
replacing the original SVLAN
Exit to system view
Create a QoS policy and enter QoS
policy view
Map the original SVLAN and CVLAN
to the new SVLAN by associating the
traffic class with the traffic behavior
Exit to system view
Table 1-6 Configure a downlink policy for the downlink port
To do...
Enter system view
Create a class and enter class view
Specify the new CVLAN for the VLAN
mapping
Specify the new SVLAN for the VLAN
mapping
Exit to system view
Create a traffic behavior and enter
traffic behavior view
Specify the original CVLAN used for
replacing the new CVLAN
Use the command...
classifier tcl-name behavior
behavior-name
quit
Use the command...
system-view
traffic classifier tcl-name [ operator
{ and | or } ]
if-match customer-vlan-id
vlan-id-value
if-match service-vlan-id vlan-id-value
quit
traffic behavior behavior-name
remark service-vlan-id vlan-id-value
quit
qos policy policy-name
classifier tcl-name behavior
behavior-name
quit
Use the command...
system-view
traffic classifier tcl-name [ operator
{ and | or } ]
if-match customer-vlan-id
vlan-id-value
if-match service-vlan-id vlan-id-value
quit
traffic behavior behavior-name
remark customer-vlan-id vlan-id-value
1-12
Remarks
Required
—
Remarks
—
Required
Required
Required
—
Required
Required
—
Required
Required
—
Remarks
—
Required
Required
Required
—
Required
Required