HP 4800G Series Configuration Manual page 212

To do...
Configure the downlink port to permit
the packets of the SVLANs to pass
through
Apply the uplink policy for the downlink
port to the inbound direction of the
downlink port
Apply the downlink policy for the
downlink port to the outbound direction
of the downlink port
Exit to system view
Enter the interface view of the uplink
port
Configure the uplink port as a trunk port
Configure the uplink port to permit the
packets of the SVLANs to pass through
Apply the uplink policy for the uplink
port to the outbound direction of the
uplink port
Table 1-4 Configure an uplink policy for the uplink port
To do...
Enter system view
Create a class and enter class view
Specify the original CVLAN for the VLAN
mapping
Specify the new SVLAN for the VLAN
mapping
Exit to system view
Create a traffic behavior and enter traffic
behavior view
Specify the new CVLAN used for replacing
the original CVLAN
Exit to system view
Create a QoS policy and enter QoS policy
view
Use the command...
port trunk permit vlan
{ vlan-id-list | all }
qos apply policy policy-name
inbound
qos apply policy policy-name
outbound
quit
interface interface-type
interface-number
port link-type trunk
port trunk permit vlan
{ vlan-id-list | all }
qos apply policy policy-name
outbound
Use the command...
system-view
traffic classifier tcl-name
[ operator { and | or } ]
if-match customer-vlan-id
vlan-id-value
if-match service-vlan-id
vlan-id-value
quit
traffic behavior behavior-name
remark customer-vlan-id
vlan-id-value
quit
qos policy policy-name
1-11
Remarks
Required
By default, a trunk port
permits only the packets
of VLAN 1 to pass
through.
Required
Required
—
—
Required
Required
By default, a trunk port
permits only the packets
of VLAN 1 to pass
through.
Required
Remarks
—
Required
Required
Required
—
Required
Required
—
Required