Ntp Configuration Task List; Multiple Instances Of Ntp - HP 4800G Series Configuration Manual

Multicast mode
Figure 1-6 Multicast mode
Server
Periodically multicasts clock
synchronization messages (Mode 5)
Clock synchronization message
exchange (Mode 3 and Mode 4)
Periodically multicasts clock
synchronization messages (Mode 5)
In the multicast mode, a server periodically sends clock synchronization messages to the
user-configured multicast address, or, if no multicast address is configured, to the default NTP multicast
address 224.0.1.1, with the Mode field in the messages set to 5 (multicast mode). Clients listen to the
multicast messages from servers. After a client receives the first multicast message, the client and the
server start to exchange messages, with the Mode field set to 3 (client mode) and 4 (server mode) to
calculate the network delay between client and the server. Then, the client enters the multicast client
mode and continues listening to multicast messages, and synchronizes its local clock based on the
received multicast messages.
In symmetric peers mode, broadcast mode and multicast mode, the client (or the symmetric active peer)
and the server (the symmetric passive peer) can work in the specified NTP working mode only after
they exchange NTP messages with the Mode field being 3 (client mode) and the Mode field being 4
(server mode). During this message exchange process, NTP clock synchronization can be
implemented.

Multiple Instances of NTP

The client/server mode and symmetric mode support multiple instances of NTP and thus support clock
synchronization within more than one VPN network. Namely, network devices at different physical
location can get their clocks synchronized through NTP, as long as they are in the same VPN.

NTP Configuration Task List

Complete the following tasks to configure NTP:
Configuring the Operation Modes of NTP
Configuring Optional Parameters of NTP
Client
Network
multicast message, the
Calculates the network delay
between client and the server
and enters the multicast
messages and synchronizes
Task
After receiving the first
client sends a request
client mode
Receives multicast
its local clock
Required
Optional
1-6
Remarks