Because users' login to the IRF system occupies large memory space, an IRF system allows at most six
users to log in at the same time. The permitted login user types are console and virtual type terminal
(VTY).
Displaying and Maintaining IRF
Display related information of the IRF
Display topology information of the IRF
Display the pre-configurations of all
members of the IRF (The
pre-configuration takes effect after the
reboot of the device.)
Display the master/slave switchover
states of IRF members
IRF Configuration Examples
IRF Connection Configuration Example
Network requirements
Three Switch 4800G series switches in an IRF form a bus connection. Their member IDs are 1, 2, and
3, as shown in
Figure
Figure 1-9 Network diagram for IRF
1
1
1
Configuration procedure
1)
The three devices are not connected. Power them on and configure them separately.
# Configure Switch 1.
<Switch1> system-view
[Switch1] irf member 1 renumber 1
To do...
1-9.
Switch 1
2
3
4
Switch 2
2
3
4
Switch 3
2
3
4
Use the command...
display irf
display irf topology
display irf configuration
display switchover state
[ member-id ]
1-18
Remarks
Available in any view
Available in any view
Available in any view
Available in any view