Displaying And Maintaining Qos Profile Configuration - H3C S5100-SI Operation Manual

To do...
Configure
the dynamic
QoS profile
application
mode
Follow these steps to apply a QoS profile manually:
Enter system view
Apply a
QoS
profile to
the
specific
ports

Displaying and Maintaining QoS Profile Configuration

To do...
Display QoS profile
configuration
Specify the
port-based
mode
Specify the
user-based
mode
To do...
In system view
Enter
Ethernet
In
port view
Ethernet
Apply a
port view
QoS profile
to the port
Use the command...
display qos-profile { all | name
profile-name | interface
interface-type interface-number |
user user-name }
Use the command...
qos-profile port-based
undo qos-profile
port-based
Use the command...
system-view
apply qos-profile
profile-name interface
interface-list
interface interface-type
interface-number
apply qos-profile
profile-name
2-4
Remarks
Optional
User-based by default
If the
authentication mode is
MAC-based,
dynamic QoS profile
application mode must
be configured
user-based.
If the
authentication mode is
port-based,
dynamic QoS profile
application mode must
be configured
port-based.
Remarks
—
Use either
approach
By default, no QoS
profile is applied to
a port.
Remarks
Available in any view
802.1x
the
as
802.1x
the
as