Displaying And Maintaining Basic Port Configuration - H3C S5100-SI Operation Manual

Only S5100-EI Series Ethernet Switches support Port Group feature.
A port can not be added to a port group if it has been added to an aggregation group, and vice
versa.

Displaying and Maintaining Basic Port Configuration

To do...
Display port configuration
information
Display the enable/disable
status of port loopback
detection
Display information for a
specified port group
Display brief information about
port configuration
Display the Combo ports and
the corresponding
optical/electrical ports
Display port information about
a specified unit
Clear port statistics
Use the command...
display interface [ interface-type |
interface-type interface-number ]
display loopback-detection
display port-group group-id
display brief interface [ interface-type
[ interface-number ] ] [ | { begin |
include | exclude } regular-expression ]
display port combo
display unit unit-id interface
reset counters interface
[ interface-type | interface-type
interface-number ]
1-9
Remarks
Available in any view
Available in user view
After 802.1x is enabled
on a port, clearing the
statistics on the port
will not work.