Configuring Aaa Accounting Methods For An Isp Domain - H3C S5500-EI Series Security Configuration Manual

If you configure an authentication method and an authorization method that use RADIUS schemes
•
for an ISP domain, the RADIUS scheme for authorization must be the same as that for authentication.
If the RADIUS authorization configuration is invalid or RADIUS authorization fails, the RADIUS
authentication also fails. Whenever RADIUS authorization fails, an error message is sent to the NAS,
indicating that the server is not responding.
• If you specify the radius-scheme radius-scheme-name local, hwtacacs-scheme
hwtacacs-scheme-name [ local | none ] option when you configure an authorization method, local
authorization or no authorization is the backup method and is used only when the remote server is
not available.
If you specify only the local or none keyword in an authorization method configuration command,
•
the switch has no backup authorization method and performs only local authorization or does not
perform any authorization.
To configure AAA authorization methods for an ISP domain:
Step
1. Enter system view.
2. Enter ISP domain view.
3. Specify the default
authorization method for
all types of users.
4. Specify the command
authorization method.
5. Specify the authorization
method for LAN users.
6. Specify the authorization
method for login users.
7. Specify the authorization
method for portal users.

Configuring AAA accounting methods for an ISP domain

In AAA, accounting is a separate process at the same level as authentication and authorization. This
process sends accounting start/update/end requests to the specified accounting server. Accounting is
optional.
AAA supports the following accounting methods:
No accounting (none)—The system does not perform accounting for the users.
•
Local accounting (local)—Local accounting is implemented on the NAS. It counts and controls the
•
number of concurrent users who use the same local user account. It does not provide statistics for
charging. The maximum number of concurrent users using the same local user account is set by the
access-limit command in local user view.
Command
system-view
domain isp-name
authorization default { hwtacacs-scheme
hwtacacs-scheme-name [ local ] | local |
none | radius-scheme radius-scheme-name
[ local ] }
authorization command { hwtacacs-scheme
hwtacacs-scheme-name [ local | none ] |
local | none }
authorization lan-access { local | none |
radius-scheme radius-scheme-name [ local |
none ] }
authorization login { hwtacacs-scheme
hwtacacs-scheme-name [ local ] | local |
none | radius-scheme radius-scheme-name
[ local ] }
authorization portal { local | none |
radius-scheme radius-scheme-name
[ local ] }
45
Remarks
N/A
N/A
Optional.
The authorization method is
local for all types of users.
Optional.
The default authorization
method is used by default.
Optional.
The default authorization
method is used by default.
Optional.
The default authorization
method is used by default.
Optional.
The default authorization
method is used by default.