Removing Shadows/Streaks That Appear Around Edges Of Images [Page Edge Filler (Adf)] - Fujitsu fi-7300NX Operator's Manual

Removing Shadows/Streaks that Appear around Edges of Images
[Page Edge Filler (ADF)]
Configure the settings to fill in the shadow or streaks around the edge of the scanned image.
Depending on the condition of the documents that you scan, the shadow of a document may appear as black
streaks on the edges of the scanned image.
In this case, remove the black streaks by filling in the edges of the scanned image.
1
Start up the Software Operation Panel.
For details, refer to
2
From the list on the left, select [Device Setting 2] → [Page Edge Filler (ADF)].
3
Specify the width of each margin (Top/Bottom/Right/Left) to fill in.
The factory default setting is "0".
Starting Up the Software Operation Panel (page
Scanner Settings (Software Operation Panel)
241).
268