Removing Shadows/Streaks That Appear Around The Scanned Image Page Edge Filler (Adf)]/[Page Edge Filler (Fb)] (Scanpartner Sp30F) - Fujitsu ScanPartner SP30 Operator's Manual

Chapter 8 Operational Settings
Vertical
magnification
Adjustment
Unit Select [Flatbed]
(ScanPartner SP30F) or [ADF] as the target for
vertical magnification adjustment.
Vertical Adjusts the vertical (length) magnification.
magnification The value can range from -3.1 to +3.1% (in
Adjustment increments of 0.1).
(Sub: length)
Description
Removing Shadows/Streaks that Appear around
the Scanned Image
[Page Edge Filler (ADF)]/[Page Edge Filler (FB)]
(ScanPartner SP30F)
Depending on the condition of the documents that you scan,
the shadow of the document may appear as black streaks.
In that case, you can improve the image quality around the
edges of the document by using the "Page Edge Filler"
function to fill in the edges.
1
Start up the Software Operation Panel.
For details, refer to "8.1 Starting Up the Software Operation Panel"
(page 116).
2
From the listing on the left, select [Device Setting 2]
[Page Edge Filler (ADF)] or [Page Edge Filler (FB)]
(ScanPartner SP30F).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
133