Replacing The Consumables; Consumables And Replacement Cycles - Fujitsu fi-7800 Operator's Manual

Replacing the Consumables

This section explains how to replace the consumables for the scanner.
The inside of the ADF becomes very hot when the scanner is being used.
CAUTION
Before you replace the consumables, make sure to turn off the power, unplug the power
cable and wait for at least 15 minutes for the inside of the ADF to cool down.

Consumables and Replacement Cycles

Name
PICK ROLLER
SEPARATOR ROLLER
BRAKE ROLLER
PRINT CARTRIDGE (*1)
Consumables need to be replaced periodically. It is recommended that you keep a stock of new consumables
and replace them before it reaches the end of the consumable life. The scanner records the number of sheets
scanned for each consumable (pick roller, separator roller, and brake roller) and the amount of remaining ink
(print cartridge), which allows you to determine when to replace consumables.
Part No.
PA03575-K011
PA03800-K012
PA03575-K013
CA00050-0262
137
Suggested Replacement Cycle
600,000 sheets or one year
600,000 sheets or one year
600,000 sheets or one year
4,000,000 characters or less (this may be
less depending on the font specified)