Replacing The Consumables; Consumables And Replacement Cycles - Fujitsu PA03768-B005 Operator's Manual

Replacing the Consumables

This section explains how to replace the consumables for the scanner.
The inside of the ADF becomes very hot when the scanner is being used.
CAUTION
Before you replace the consumables, make sure to turn off the power, unplug the power
cable and wait for at least 15 minutes for the inside of the ADF to cool down.

Consumables and Replacement Cycles

Name
BRAKE ROLLER
PICK ROLLER
Consumables need to be replaced periodically. It is recommended that you keep a stock of new consumables
and replace them before it reaches the end of the consumable life. Also, the scanner records the number of
sheets scanned for each consumable (brake roller and pick roller), which allows you to determine when to
replace the consumables.
The procedure to check the number of sheets scanned is as follows.
1
On the touch screen, press
2
On the [Consumable counters] screen, check the [After Replacing the Brake Roller] and [After
Replacing the Pick Roller] counters.
● When the background color of the counter is yellow
It is about time to replace the brake roller or pick roller.
● When the background color of the counter is red
It is time to replace the brake roller or pick roller. Replace the brake roller or pick roller.
To use the Software Operation Panel in order to check the value, refer to
(page 266).
Part No.
PA03670-0001
PA03670-0002
→ [Cleaning & Maintenance] → [Consumable counters].
127
Suggested Replacement Cycle
200,000 sheets or one year
200,000 sheets or one year
Settings Related to Sheet Counters