Replacing The Consumables; Consumables And Replacement Cycles - Fujitsu SP-1120N Operator's Manual

Replacing the Consumables

This section explains how to replace the consumables for the scanner.
The inside of the ADF becomes very hot when the scanner is being used.
CAUTION
Before you replace the consumables, make sure to turn off the power, unplug the power
cable and wait for at least 15 minutes for the inside of the ADF to cool down.

Consumables and Replacement Cycles

Name
ROLLER SET
● Brake roller
● Pick roller
Consumables need to be replaced periodically. It is recommended that you keep a stock of new consumables
and replace them before it reaches the end of the consumable life. Also, the scanner records the number of
sheets scanned, which allows you to determine when to replace the consumables.
For information on how to check the number of sheets scanned, refer to
(page 135).
Note that the suggested replacement cycles are guidelines for using A4 (80 g/m
containing paper, as these cycles vary depending on the type of documents scanned and how often the scanner
is used and cleaned.
Part No.
PA03708-0001
77
Suggested Replacement Cycle
100,000 sheets or one year
Settings Related to Sheet Counters
2
[20 lb]) wood-free or wood-