Yamaha WR250F(P) Owner's Service Manual page 572

STEERING
4. Install:
Washer 1
G
Steering ring nut 2
G
Tighten the steering ring nut using the
steering nut wrench 3.
Refer to "STEERING HEAD INSPEC-
TION AND ADJUSTMENT" section in
the CHAPTER 3.
5. Check the steering stem by turning it lock
to lock. If there is any binding, remove
the steering stem assembly and inspect
the steering bearings.
6. Install:
Washer 1
G
7. Install:
Front fork 1
G
Upper bracket 2
G
NOTE:
Temporarily tighten the pinch bolts (lower
G
bracket).
Do not tighten the pinch bolts (upper bracket)
G
yet.
8. Install:
Washer 1
G
Steering stem nut 2
G
5 - 51
CHAS
7 Nm (0.7 m · kg, 5.1 ft · lb)
145 Nm (14.5 m · kg, 105 ft · lb)