TRENDnet TEW-753DAP User Manual
  1. Manuals
  2. Brands
  3. TRENDnet Manuals
  4. Wireless Access Point
  5. TEW-753DAP
  6. User manual

TRENDnet TEW-753DAP User Manual

N600 high power dual band poe access point
Hide thumbs Also See for TEW-753DAP:
Table of Contents

Advertisement

Quick Links

Download this manual
TEW-753DAP User's Guide
© Copyright 2013 TRENDnet. All rights reserved.
a

Advertisement

Table of Contents
loading

Related Manuals for TRENDnet TEW-753DAP

Summary of Contents for TRENDnet TEW-753DAP

  • Page 1 TEW-753DAP User’s Guide © Copyright 2013 TRENDnet. All rights reserved.

  • Page 2: Table Of Contents

    Access Point �������������������������������������������������������������������������������������� 6 Client Bridge ������������������������������������������������������������������������������������� 7 Repeater ������������������������������������������������������������������������������������������� 7 Wireless Distribution System ������������������������������������������������������������ 8 System configuration ��������������������������������������������������������������������������9 System Management and Default Settings �������������������������������������� 9 Log-in System Management for the First Time ��������������������������������� 9 © Copyright 2013 TRENDnet. All rights reserved.

  • Page 3: Product Overview

    Product Overview Product Overview Features TRENDnet’s N600 Dual Band PoE Access Point, model TEW-753DAP, is a feature rich business class access point with proven concurrent 300 Mbps dual band wireless technology. A variety of installation scenarios are supported with Access Point, WDS AP, WDS Bridge, and Repeater modes.
  • Page 4 *Maximum wireless signal rates are referenced from IEEE 802.11 theoretical specifications. Actual data throughput and coverage will vary System Logs depending on interference, network traffic, building materials and other Eight system log filters aid network troubleshooting conditions. © Copyright 2013 TRENDnet. All rights reserved.

  • Page 5: Front Panel

    Power Wireless Network Connectors Reset Button • Push and hold for 2 seconds to reset TEW-753DAP Gigabit PoE Port DC Power 12V DC 1.25A • Push and hold for more than 10 seconds to reset configuration to factory default (Optional)

  • Page 6: Product Preset Information

    TEW-753DAP. The second label including two sets of T-Bar clippers, two sets of screws, and a set of is located on the bottom of the TEW-753DAP. You can find default SSID, spacers� wireless key, administrator account, and administrator password there.

  • Page 7: Hardware Installation �������������������������������������������������������������������������5 Wds Frequent Asked Questions

    Two additional bronze screw holes are provided for T-Bar mounting. between mounting points is 2 3/4” (7cm) Use two P2.6 screws to secure the TEW-753DAP on T-Bar clip and then clip on the T-Bar. © Copyright 2013 TRENDnet. All rights reserved.

  • Page 8: Wireless Performance Considerations

    There are a number of factors that can impact the range of wireless devices. Adjust your wireless devices so that the signal is traveling in There are four operating modes provided by TEW-753DAP, Access Point, Client a straight path, rather than at an angle. The more material the signal Bridge, WDS and Repeater.

  • Page 9: Client Bridge

    Make sure all the settings on selected interface of the TEW-753DAP matches the wireless access points you want to repeat in same wireless settings including SSID, channel and wireless encryption settings.

  • Page 10: Wireless Distribution System

    DHCP and 802.1X authentication. Because the WDS implementation different from product to product, not all WDS enabled products are interoperable. You have to use multiple TEW-753DAP to build your mesh Wireless Distribution System wireless DS or transparent bridge.

  • Page 11: System Configuration

    System configuration System Management and Default Settings If you have a brand new out of box TEW-753DAP or if you just reset Search for available wireless connections in your computer’s TEW-753DAP to factory defaults by pressing and holding reset button network settings.
  • Page 12 TEW-753DAP User’s Guide System Configuration Open a web browser and type http://tew-753DAP to access web Change your administration login password away from factory administration page. default setting. Click Next to continue. If you have a static IP set on your PC, please open a web browser and enter http://192.168.10.100 The TEW-735AP login page will...
  • Page 13 Click Save/ Reload on top of the menu and then click Save & Apply� TEW-753DAP will apply password change and then reboot. Login again with your new password. * Make sure you are still connecting to TEW-753DAP after reboot if you wireless connects to TEW-753DAP. © Copyright 2013 TRENDnet. All rights reserved.

  • Page 14: Setup Wizard

    Setup Wizard Setup wizard is provided as part of the web configuration utility. It sets Enter the management IP address for this TEW-753DAP. The default up the basic administrator password and management IP address by IP address is 192.168.10.100. Set it up in your network management clicking on the Wizard button on the function menu.

  • Page 15: Save/ Reload

    The number that follows Save/ Reload is a reminder that shows how many changes are in the queue waiting to be applied. * Make sure you are still connecting to TEW-753DAP after reboot if you wireless connects to TEW-753DAP. © Copyright 2013 TRENDnet. All rights reserved.

  • Page 16: Status

    TEW-753DAP User’s Guide System Configuration Status Main status page shows TEW-753DAP’s basic information. Click Status then click Main to show the page. System Information Device Name : Name of this device that is recognized by other network devices such as SNMP.
  • Page 17 TEW-753DAP User’s Guide System Configuration LAN Settings IP Address : IP address of the TEW-753DAP Subnet Mask : Network range of IP address Default Gateway : The default route going further from TEW-753DAP subnet. Primary DNS : Primary DNS server address Secondary DNS : Secondary DNS server address DHCP Client : DHCP client status.
  • Page 18 Profile Settings : Briefly shows wireless settings (SSID/ RX (packets) Received packets by 2.4GHz wireless Security/ VID/ 802.1q) on each SSID. interface Distance : The distance setting for 5GHz wireless TX (packets) Transmitted packets from 2.4GHz wireless interface. interface © Copyright 2013 TRENDnet. All rights reserved.
  • Page 19 Kick and Ban : Click this button to send this client to MAC address filter list. Click OK when you see this prompt. (Save/ Reload is required to apply change.) Refresh : Click this button to refresh the list © Copyright 2013 TRENDnet. All rights reserved.
  • Page 20 Clear : Click this button to clear the log MAC address filter list. Click OK when you see this prompt. (Save/Reload is required to apply change.) Refresh : Click this button to refresh the list © Copyright 2013 TRENDnet. All rights reserved.

  • Page 21: System

    The interface can connect to an AP dynamically (channels and encryption). The assigned wireless interface bridges the traffic to the Ethernet and the other TEW-753DAP wireless interface. Repeater In this mode, the wireless interface repeats wireless signal and packets for backbone communication as well as a client access.
  • Page 22 This allows a wireless network to be expanded using multiple access points without the need for a wired backbone. TEW-753DAP WDS operation has three sub modes: WDS Access Point, WDS Bridge, or WDS Station...
  • Page 23 TEW-753DAP User’s Guide System Configuration IP Settings The TEW-753DAP has a static IP (192.168.10.100) set for management purposes. You can change this IP address to fit your network plan or manage multiple TRENDnet access points. You can also set the TEW- 753DAP to DHCP client to accept an IP dynamically.
  • Page 24 System Configuration Spanning Tree Band Steer The TEW-753DAP is designed for end point access as well as backbone In the office, the 2.4GHz is always crowded than 5GHz. There are fewer connection. To avoid network looping, you can enable 802.1d spanning non-overlapping channels and more legacy devices in 2.4GHz compare...

  • Page 25: G Wireless

    Otherwise, check auto to select the channel automatically which is selected by default. (When you choose 20/40MHZ or 40MHz channel HT mode, the channel selection list is shorter. Four marginal channels are reserved for channel expansion.) © Copyright 2013 TRENDnet. All rights reserved.
  • Page 26 System Configuration AP Detection Current Profile Before you setup your TEW-753DAP wireless settings, you SSID (1 - 8) : The wireless network name setup for this SSID. may want to know what signal are currently broadcasting. Security : Wireless security type setup for this SSID.
  • Page 27 WPA2 or WPA Mixed for your wireless security. Station Separation : If you enable station separation, wireless clients (a.k.a. STAs) associated with this SSID cannot communicate to each other directly even if they are in the same wireless group. © Copyright 2013 TRENDnet. All rights reserved.
  • Page 28 If the challenge text is encrypted correctly, the access point allows the requesting device to authenticate. It is recommended to select Auto if you are not sure which authentication type is used. © Copyright 2013 TRENDnet. All rights reserved.
  • Page 29 This group of wireless security settings use the preshared Encryption : Select TKIP, AES, or Both. The encryption key, PSK, stored on you TEW-753DAP to secure your algorithm used to secure the data wireless connections. WPA2 is currently the most communication.
  • Page 30 (default: 3600 seconds/ 1 hour) Radius Enable or disable RADIUS accounting Accounting : service Apply : Click this button to apply the changes Cancel : Click this button to cancel the change © Copyright 2013 TRENDnet. All rights reserved.
  • Page 31 TEW-753DAP’s 2.4GHz wireless interface. Choose “Allow MAC in the List” to deny clients that aren’t on the list to associate with the TEW-753DAP’s 2.4GHz wireless interface. © Copyright 2013 TRENDnet. All rights reserved.
  • Page 32 30. The default value is 1 Km. Aggregation : Combine short packets and send them together. Enabling packet aggregation will increase data throughput. However, it may cause jitters or delays in real-time communication. © Copyright 2013 TRENDnet. All rights reserved.
  • Page 33 TEW-753DAP User’s Guide System Configuration WPS is one way to connect a wireless client to the TEW-753DAP. You don’t have to select the encryption mode and fill in a long encryption passphrase every time when you try to setup a wireless connection. You only need to press a button on both the wireless client and the TEW- 753DAP, and WPS will do the rest for you.
  • Page 34 WPS via PIN : Specify a PIN, a unique number that can be used to add the router to an existing network or to create a new network. Then click the Start to Process button © Copyright 2013 TRENDnet. All rights reserved.

  • Page 35: 5G Wireless

    VID : VLAN id for this SSID Enable : Check this box to enable this SSID Edit : Click Edit to change the settings for this SSID (Save/Apply is required to apply changes.) © Copyright 2013 TRENDnet. All rights reserved.
  • Page 36 TEW-753DAP User’s Guide System Configuration AP Detection Before you setup your TEW-753DAP wireless settings, you may want to know what signals are currently broadcasting. Click Scan to do a site survey and list the running access points around you. BSSID : Basic SSID. This is a strictly unique SSID to identify a wireless access point, WAP.
  • Page 37 Station Separation : If you enable station separation, wireless clients (a.k.a. STAs) associated with this SSID cannot communicate to each other directly, even if they are in the same wireless group. © Copyright 2013 TRENDnet. All rights reserved.
  • Page 38 System Configuration WPA-PSK, WPA2-PSK, Mixed WPA-PSK This group of wireless security settings use the preshared key, PSK, stored on you TEW-753DAP to secure your wireless connections. WPA2 is currently the most advanced wireless encryption. Choose this option if all of your devices support WPA2.
  • Page 39 (default: 3600 seconds/ 1 hour) Radius Enable or disable RADIUS accounting Accounting : service Apply : Click this button to apply the changes Cancel : Click this button to cancel the change © Copyright 2013 TRENDnet. All rights reserved.
  • Page 40 TEW-753DAP’s 5GHz wireless interface. Choose “Allow MAC in the List” to deny clients that aren’t on the list from associating with the TEW-753DAP’s 5GHz wireless interface. © Copyright 2013 TRENDnet. All rights reserved.
  • Page 41 Transmit Power : Wireless signal transmission power. Setting transmission power to an appropriate value can make your multiple AP deployment easier. The default value is 18 dBm. Valid settings are between 11 and 18 (both FCC and CE). © Copyright 2013 TRENDnet. All rights reserved.
  • Page 42 127. The valid numbers are from 1 to 127. The default value is 127. WPS is one way to connect a wireless client to the TEW-753DAP. You don’t have to select the encryption mode and fill in a long encryption WMM Parameters passphrase every time when you try to setup a wireless connection.
  • Page 43 Then click the Start to WPS Current Status Displays the current status of the Process button WPS configuration. Press Release Configuration to release previous settings. Self Pin Code Displays PIN code of TEW-753DAP © Copyright 2013 TRENDnet. All rights reserved.

  • Page 44: Management

    SSIDs. Different SSIDs should be set with different VLAN IDs. Enable Virtual LAN service and click Apply to save the changes. LAN VLAN MGMT is a special VLAN to manage the TEW-753DAP. Enabling management VLAN tagging will keep all services, for example DHCP server and client, in this VLAN.
  • Page 45 VLAN, specified in VLAN ID field. (1 ~ 4094) Apply : Click this button to apply the changes. (Save/Apply is required to apply changes.) Cancel : Click this button to cancel the change. © Copyright 2013 TRENDnet. All rights reserved.
  • Page 46 100. The traffic limit of this SSID is calculated as: Outgoing Traffic Limit * Total Percentage. Apply : Click this button to apply the changes. (Save/Apply is required to apply changes.) Cancel : Click this button to cancel the change © Copyright 2013 TRENDnet. All rights reserved.
  • Page 47 753DAP SNMP allows messages (called protocol data units) to be sent to various Location : Specify the location of the TEW-753DAP parts of a network. Upon receiving these messages, SNMP-compatible Community Name Specify the password for access the SNMP...
  • Page 48 Encryption Key. Enter your encryption key and then http://www.trendnet.com/downloads/ click Save to save the key to the TEW-753DAP. The new configuration file will be saved and encrypted with this new key. In case you want to reset TEW-753DAP’s configurations back to factory defaults, click Factory Default in this page.
  • Page 49 Choose this selection to get the time from a network time server automatically. Select the Time Zone of the country or region you are currently in. The TEW-753DAP will set its time based on your selection. If you have a preferred NTP server, check the User defined NTP Server and Enter the NTP server IP address.
  • Page 50 Delete All : Click this button to clear the list Reset : Reset previous selections Apply : Click this button to apply the changes. Cancel : Click this button to cancel the change. © Copyright 2013 TRENDnet. All rights reserved.
  • Page 51 -- 2.4G-Wireless Apply to save the log locally. You can view the log in Status wless5 -- 5G-Wireless mgmt -- Management > System Log tree -- Tree help -- Help reboot -- Reboot tew-753dap> © Copyright 2013 TRENDnet. All rights reserved.
  • Page 52 System Configuration Diagnosis PING There are 3 network tools you can use on the TEW-753DAP: ping, Enter the Target IP / Domain Name, Ping Packet Size and traceroute, and speed test. Number of Pings and then click Start Ping to start the PING tool.
  • Page 53 Speed Test Device Discovery Setup an iperf server. Enter the server address as the The TEW-753DAP can discover other TEW-753DAPs on neighboring Target Address, Time Period, Check Interval and then click wired or wireless network. Start Speed Test to start the speed test tool. The default IPv4 test port is 5001 and the IPv6 test port is 5002.
  • Page 54 Logout them or all of them on or off. Click the LED you want to turn on or off Logout from the management page. The TEW-753DAP allows only one and then click Save/Apply to save and apply the changes. management login at the same time. If you want to access the TEW- 753DAP from different computer, remember to logout of the web management page first.

  • Page 55: Appendix

    WDS links create transparent bridges facilitate layer 2 seamless communication. You don’t have to use WDS if you don’t need layer 2 services passing through TEW-753DAP, such as MAC filtering, and 802.1X authentication. You can simply use AP, Client Bridge, and Repeater mode to fit most of your network plan.

  • Page 56: Federal Communication Commission Interference Statement

    This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. © Copyright 2013 TRENDnet. All rights reserved.

  • Page 57: Europe - Eu Declaration Of Conformity

    5 GHz high performance RLAN equipment This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries, except in France and Italy where restrictive use applies. © Copyright 2013 TRENDnet. All rights reserved.
  • Page 58 Directive 1999/5/EC, 2006/95/EC, and 2009/125/EC. requisitos essenciais e outras disposições da Directiva 1999/5/CE, [Portuguese] 2006/95/CE e 2009/125/CE. Por medio de la presente TRENDnet declara que el TEW-753DAP Español cumple con los requisitos esenciales y cualesquiera otras [Spanish] Slovensko...

  • Page 59: Limited Warranty

    RMA service must have the RMA number marked on the outside of return packages and look for the desired TRENDnet product to access to the GPL Code or LGPL Code. and sent to TRENDnet prepaid, insured and packaged appropriately for safe shipment.
  • Page 60 TEW-753DAP User’s Guide Warranty © Copyright 2013 TRENDnet. All rights reserved.

Table of Contents