Wireless Mode - Wds; Wireless Mode - Wds+Ap; Wireless Security Mode; Wireless Security Mode - None - TRENDnet TEW-750DAP User Manual

TRENDnet User's Guide
802.11 Mode: Select which 802.11 wireless modes to use from the drop-down
menu. Options to choose from are 802.11b only, 802.11g only, 802.11n only,
Mixed 802.11g and 802.11b, Mixed 802.11n and 802.11g, and Mixed 802.11n,
802.11g and 802.11b. If you are not sure, select Mixed 802.11n, 802.11g and
802.11b.
Enable Auto Channel Scan: Tick the check box to allow the AP to find and use
the wireless channel with the least interference in your environment.
Wireless Channel: Deselect Enable Auto Channel Scan to be able to
configure this. Use the drop-down menu to select a wireless channel.
Transmission Rate: Select the wireless transmission rate. It is advisable to keep
this option on Best (Automatic).
Channel Width: Select the wireless channel width used. Options to choose from
are 20MHz and 20/40MHz (Auto).
Visibility Status: Click Invisible to hide the Wireless SSID and Visible to reveal
it.
WMM Enable: WMM is QoS for your wireless network. This will improve the
quality of video and voice applications for your wireless clients.
Wireless Mode – WDS
When selecting WDS in the Mode drop-down menu, the following section
appears.
Remote AP MAC Address: Enter the MAC address of a remote AP. Click the
Site Survey button to see the available AP in the area. Click the radio button to
select the corresponding AP and Connect to have the AP's MAC address in the
field.
Wireless Mode – WDS+AP
When selecting WDS+AP in the Mode drop-down menu, the following section
appears.
© Copyright 2013 TRENDnet. All Rights Reserved.
Enable Lazy Mode: Tick the check box to enable the Lazy mode. When
enabling the Lazy mode, there is no need to enter the MAC address of any
remote AP.
Remote AP MAC Address: Enter the MAC address of a remote AP. Click the
radio button to select the corresponding AP and Connect to have the AP's MAC
address in the field.

Wireless Security Mode

This section allows you to select various wireless security modes for the 2.4GHz
band. The corresponding configuration will then appear at the bottom half of the
window. Available options are None, WEP, WPA-Personal and WPA-
Enterprise.
Wireless Security Mode – None
By selecting this mode, there will be no wireless security applied to your wireless
network. This means that anyone with a wireless adapter can connect to your
network.
TEW­750DAP
14