Ap Mode Support (Point To Point Bridging); Wireless Mode - TRENDnet TEW-638APB User Manual

AP Mode Support (Point to Point Bridging)

Use the AP Mode setting to enable the Point to Point bridging option of the TEW-638APB. Select the
radio button to toggle between the AP Mode enable or disabled the feature. To configure two AP to work
together in the bridging mode, add the wireless MAC address of the remote AP in to the AP MAC Addr.
(Optional) field. Perform the same process on the second AP using the wireless MAC address from the
first configured AP.
AP Mode enabled
AP #2 MAC Address AP #1 MAC Address
entered here entered here

Wireless Mode

If all of the wireless devices you want to connect with this Access Point can connect in the same
transmission mode, you can improve performance slightly by choosing the appropriate "Only" mode. If
you have some devices that use a different transmission mode, choose the appropriate "Mixed" mode.
Wireless Modes
Page 40