Choosing Your Device Mode; Access Point (Ap) Mode - TRENDnet TEW-750DAP User Manual

TEW-750DAP
TRENDnet User's Guide

Choosing your device mode

Access Point (AP) Mode

By default, your access point functions in Access Point mode, creating a wireless network to allow wireless client devices to connect and access your network resources and access the
Internet.
The diagram below shows your access point connected to one of your router LAN ports and functioning in Access Point mode allowing wireless clients (ex. laptops, game consoles, DVRs,
Smart TVs, and mobile devices, etc.) to wirelessly connect to your access point to establish network and Internet connectivity.
Note: The TEW-750DAP has dual band wireless capability allowing the access point to broadcast a wireless network name on two separate bands, 2.4GHz and 5GHz. Wireless clients can
connect to your access on either band depending on the wireless band supported by your wireless client. The 2.4GHz band is more commonly used and supported for general applications
such as Internet access and web browsing. The 5GHz band is less commonly used and supported which can be more useful for higher or stable bandwidth application requirements such as
media streaming as this band may be less likely affected by neighboring wireless networks operating on the 5GHz band.
© Copyright 2013 TRENDnet. All Rights Reserved.
9