Mac Filter - TRENDnet TEW-735AP User Manual

TRENDnet User's Guide

MAC Filter

Set up a list of clients and policies allow only the clients on the list to
associate with this AP or to reject clients on the list from associating with
this AP. Set up the list with MAC addresses. A MAC address is a unique ID
assigned by the manufacturer of the network adapter.
Enable
Check this box to enable the feature (Click
Wireless
Apply to commit the change)
Access
Control:
Deny / Allow
Choose "Deny all clients with MAC address
Policy:
listed below to access the network" to allow
clients that aren't on the list to associate with
the TEW-735AP.
Choose "Allow all clients with MAC address
listed below to access the network" to deny
clients that aren't on the list to associate with
the TEW-735AP.
© Copyright 2015 TRENDnet. All Rights Reserved.
Encryption: MAC address: Enter the device's MAC
address.
ADD: Click to add a MAC address into the
table.
Reset: Click to reset entry.
Delete Selected: Allows you to delete the
selected entry.
Delete All: Deletes all entries in the MAC
address table.
Reset: Reset all entries.
Apply: Click to apply changes made.
Cancel: Click to cancel any new changes
made.
Description: Enter readable information about this client.
MAC Address: Enter the device's MAC address.
Add: Click this button to add a MAC address to the list.
Reset: Click this button to abandon the change.
TEW-735AP
28