Replacing A Card - HP Surestore Tape Library Model 2/20 User Manual

Replacing a Card

Chapter 5
1. Align the edges of the replacement card with the card slot.
2. Gently push on the lower third of the replacement card, inserting it into the
library until the card is flush with the library. This will help ensure that the
backplane pins are optimally aligned.
3. Tighten the thumbscrews with a flat-blade screwdriver.
4. Reconnect external cables.
5. Power on the library.
6. Download new firmware (see
7. If installing Fibre Channel cards for the first time, configure the library
from the front panel. See
page 102.
Upgrading Firmware
Configuring the Library for Fibre Channel
Removing and Replacing Cards 161
on page 176).
on