Windows Nt; Windows 2000 - HP Surestore Tape Library Model 2/20 User Manual

Windows NT

Windows 2000

Chapter 1
For Windows NT™ operating systems, perform the following operating system
configurations:
Install the appropriate host bus adapter(s)
Install the corresponding drivers for the interface card(s)
To verify the hardware installation, look for the library and drives after
powering up the host. Go into Settings -> Control Panel -> SCSI Adapter.
Install the backup software
Run a test backup to ensure that all components are properly configured.
For Windows 2000™ operating systems, perform the following operating
system configurations:
Install the appropriate host bus adapter(s)
Install the corresponding drivers for the interface card(s)
To verify the hardware installation, look for the library and drives after
powering up the host:
— Right click on My Computer
— Select Manage -> System Tools -> Device Manager
— Medium Changer and Tape Drives should be listed
Install the backup software
Run a test backup to ensure that all components are properly configured.
Verifying the Host Configuration 51