Figure 14
(larger trim brackets)
30
Installing the 2/20, 4/40 & 6/60 Series Libraries into a Rack
8. Open the tape drawers and tighten the screws to secure the library into
place
(Figure
14).
— For trim brackets, tighten the existing thumbscrews.
— For flushmount brackets, use two 10-32 x .50 screws.
Note
The drawers may be key locked. The keys are attached to the
power supply handle on the back of the library.
Location of Securing Screws
(flush-mount trim brackets)
Chapter 1