Replace A Pcie Card - HP HPE Alletra 2140 Hardware Manual

Note: If firmware updates are required, the new controller can take longer to appear in the UI. If the controller
takes longer than 45 minutes to report an Active/Standby state, contact HPE Support for assistance.
11. Return the failed controller as directed on the RMA work order that came with the replacement kit.

Replace a PCIe Card

Use this procedure to replace existing network interface cards (NICs), host bus adapters (HBAs), or storage class memory
(SCM) on your HPE storage array.
Note: SCM is available for HPE Alletra 6050, 6070, and 6090 model arrays.
Before you begin
Time required:
Parts required:
Tools required:
Information required:
Support contact:
HPE recommends using the Maintenance Window functionality within the HPE InfoSight portal to inform HPE Support of
upcoming maintenance windows.
Refer to https://infosight.hpe.com/dashboards/nimble/wellness/maintenance-windows for more information.
1 Slot 1
2 Slot 2
3 Slot 3
4 Slot 4
5 Slot 5
The HPE Alletra 6010 model includes only the left PCIe cage with the first three PCIe card slots.
15 minutes per controller
Replacement NIC, HBA, or SCM ordered from HPE
ESD (electrostatic discharge) strap or appropriate grounding device
RMA (Return Materials Authorization) work order
Case number
Array name or serial number
The array serial number can be found on the pullout System Info tab.
See Support.
6 Slot 6
7 Serial port
8 OCP expansion slot
9 Eth0 ports, onboard
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
Maintenance Procedures 76