Unloading A Tape From The Drive; Cleaning A Drive - HP Surestore Tape Library Model 2/20 User Manual

Unloading a Tape from the Drive

Cleaning a Drive

Chapter 2
1. From the
Drive and Tape Operations
2. Use the or keys to select the drive you want to unload. You can only
[-] [+]
select a full drive.
3. Select to move the tape from the drive to the tape's original
[Unload]
location (the slot it occupied before being loaded into the drive). If that slot
is occupied, you will be asked to select another slot location.
4. The tape automatically rewinds before it is unloaded. A status screen
displays the library's progress as the tape is relocated.
5. From the
Drive and Tape Operations
menu.
Operations
Main Menu -> Operations -> Drive and Tape Operations
Note Use a cleaning cartridge to clean a drive. The drive mechanism
should only be cleaned if the clean drive icon displays (see
5 on page 62).
Caution Ensure you use the correct cleaning cartridges for your tape
drive. Damage may occur if inappropriate media is used. For
more information, refer to
menu, select
[Unload Tape from Drive]
menu, select to return to the
[Menu]
on page 188.
Table 36
Drive and Tape Operations
.
Table
87