Configuring The Library - HP Surestore Tape Library Model 2/20 User Manual

Configuring the Library

Table 11
Menu Item
Password See
page 92.
Network See
page 96.
Access
See
Mailslot
Configuration
See
Fibre Channel
on page 102 or
or SCSI IDs
Save Element Allows the host to continue reserving drive or
Reserve After slots after a power cycle (a SCSI element
a Power Cycle reservation). This is typically used to ensure that
only one host can access a slot or drive. See
Configuration Information
90

Configuring the Library

Main Menu -> Administration -> Change Configuration
Note When you reconfigure the library, you may also need to
reconfigure your backup software. For more information, consult
the documentation provided with your software.
You can change the following configuration options for the library:
Configuration Options
Description
Enabling and Changing the Password
Using the Remote Management Card
Configuring the Mailslot
Configuring the Library for Fibre Channel
Setting SCSI IDs
on
on
on page 93.
on page 106.
on page 112.
Default Options
Off On or Off
DHCP Off Assign an IP
address or use
DHCP
One-slot 0 slots, 1 slot, 1
magazine, or 2
magazines
N/A N/A
Off On or Off
Chapter 3