HP Surestore Tape Library Model 2/20 User Manual page 219

Table 46
Decimal Hex
Error Error
111 6fH
112 70H
113 71H
114 72H
118 76H
120 78H
121 79H
122 7AH
123 7BH
126 7EH
130 82H
Appendix
Error Codes and Recovery Procedures
Description
Slave controller card
missing or faulty.
Slave board
command timeout.
Slave controller card
failed self test.
Slave controller card
failed initialization.
Slave controller is on
level 1.
Library controller
unable to
communicate with
Fibre Channel card.
Failed to detect all of
the Fibre Channel
cards.
Fibre Channel board
command timeout.
A Fibre Channel card
has failed.
More than one Fibre
Channel card is on a
library level.
Library controller
unable to
communicate with
remote management
card.
Recovery Method
Ensure the slave controller card is installed and fully
seated.
Retry command.
Power cycle the library.
Power cycle the library.
Remove slave controller card from the bottom level
of the library.
Ensure Fibre Channel card is installed and fully
seated.
Power cycle the library.
Power cycle the library.
Power cycle library and retry. Replace card if
unsuccessful (Removing and Replacing Cards
page 160).
Remove duplicate Fibre Channel card.
Power cycle the library.
on
Library Error Codes 217