Replacing The Hot-Swap Rs/12 Scsi Card; Removing The Rs/12 Scsi Card - HP Rack Storage/12 Installation Manual

Chapter 5

Replacing the Hot-swap RS/12 SCSI Card

This section lists steps to remove and install the RS/12 SCSI card (see
Figure 5-5).
Figure 5-5. Replacing the RS/12 SCSI Card

Removing the RS/12 SCSI Card

NOTE
Follow step 1 only for simplex and duplex configurations. The
hard drives can still be accessed in cluster configurations.
1. Close all applications and log off all users on the host system using the
hard drives connected to the RS/12 SCSI card.
2. Disconnect the cable connecting the RS/12 SCSI card to the host system.
38
Removing and Installing HP Rack Storage/12 Components
Thumbscrews