Drive And Tape Operations; Loading A Tape Into A Drive - HP Surestore Tape Library Model 2/20 User Manual

Drive and Tape Operations

Loading a Tape Into a Drive

86 Drive and Tape Operations
Main Menu -> Operations -> Drive and Tape Operations
Look at the product information labels on the back of the library and the labels
inside each tape drawer for more information about drive and slot numbering.
The numbering scheme is also illustrated in
page 33.
Note The "Home" and "Map" front panel screens illustrate the drive,
slot, and mailslot numbering schemes. Slot numbers displayed in
reverse video indicate those reserved for the mailslot.
1. From the
Drive and Tape Operations
2. Use the or key to select any slot. Only full slots are available for
[-] [+]
selection.
Select .
[OK]
3. Use the or key to select the desired drive. You can only select empty
[-] [+]
drives that are compatible with the tape type.
4. Select to move the tape from a slot to a drive.
[Load]
A confirmation screen indicates that the tape is loaded.
Library Back Panel Features
menu, select
[Load Tape from Drive]
on
.
Chapter 2