Getting Started - HP Surestore Tape Library Model 2/20 User Manual

Getting Started

Chapter 1
After you install and configure the library, you must complete the following
setup tasks from the library's front panel:
Setting the date and time: When you first set up the library or if it has
been unplugged for an extended period of time (around 8 days), set the
library's real-time clock. See
more information.
Setting the mailslot configuration: The default setting is for a one-slot
mailslot. You can select a 0-slot, 1-slot, 1-magazine, or 2-magazine
mailslot. See Configuring the Mailslot
Note Mailslot configuration must be set prior to installing the backup
software.
Configuring the library for web monitoring: You can monitor and
manage your library anywhere on the network through user friendly web
pages. See Using the Remote Management Card
information.
Enabling the password: The library does not have an administrator
password enabled when it arrives. To ensure security and to get full use of
the remote management card, enable and select a password. Be sure to
remember this password. See
page 92 for more information.
You must first set a library password through the front panel to
Note
configure the library using the remote management card (see
Enabling and Changing the Password
Setting the Date and Time
on page 93 for more information.
on page 96 for more
Enabling and Changing the Password
on page 92).
on page 108 for
on
Getting Started 53