Memory Options; Installing Fbdimms; Mezzanine Card Option - HP StorageWorks All-in-One SB600c Storage Blade Solution User Manual

Memory options

The HP AiO SB600c Server Blade is configured with 2 GB of memory. The server contains eight FBDIMM
slots and the Operating System can address up to 4 GB of memory. Using the Advanced Memory
Protection options will allow 4 GB more of memory to be used as an online spare or mirrored memory.
See http://www.hp.com

Installing FBDIMMs

To install the component:
1.
Power down the server blade.
See Powering down the HP All-in-One SB600c Storage Blade Solution
information.
2.
Remove the server blade. See
information.
3. Remove the access panel. See 21 for more information.
4. Install the FBDIMM.
Figure 5 Installing FBDIMMs
5.
Install the access panel. See
6.
Install the server blade.
See Installing the HP AiO SB600c Server and Storage Blades
7.
Power up the server blade.
See Powering up the HP All-in-One SB600c Storage Blade Solution

Mezzanine card option

Optional mezzanine cards are classified as Type I mezzanine cards and Type II mezzanine cards.
The card type determines where it can be installed in the server blade. Optional mezzanine cards
enable network connectivity and provide Fibre Channel support. For mezzanine card locations, see
System board components
• Install Type I mezzanine cards on either mezzanine 1 connector or mezzanine 2 connector.
for more information.
Removing the HP AiO SB600c Server Blade
Installing the access panel
on page 48 for more information.
on page 19 for more
on page 20 for more
on page 22 for more information.
on page 13 for more information.
on page 19 for more information.
All-in-One SB600c Storage Blade Solution
31