Moving Tapes Between Slots - HP Surestore Tape Library Model 2/20 User Manual

Moving Tapes Between Slots

88 Drive and Tape Operations
1. From the
Drive and Tape Operations
2. From
Choose Cleaning Slot
location of the cleaning tape. Refer to the label inside the library drawer,
the front panel display, or
list of the slot numbers.
Select .
[OK]
3. Using the or
[-] [+]
Select .
[Clean]
When the cleaning process is complete, the cleaning tape will be returned
to the original slot location. If the cycle failed, the screen will display the
appropriate status information. See
on page 140 for possible cleaning problems.
Note Drives can also be cleaned from remote access. See
Remote Management Card
Main Menu -> Operations -> Drive and Tape Operations
1. From the
Drive and Tape Operations
2. Select the slot where you want to move the tape from using the
[++] keys, and press
3. Select the slot where you want to move the tape to using the
keys, and press
[OK]
is reserved or is the original "home" slot for a tape in the drive.
A status screen indicates the tape is being moved.
menu, select
, use the ,
[-] [+]
Library Back Panel Features
keys, select the number of the drive to be cleaned.
Troubleshooting Common Problems
on page 96.
menu, select
.
[OK]
. A message will display if the destination slot chosen
.
[Clean Drive]
or [++] key to select the slot
on page 33 for a
Using the
[Move Tape Slot-to-Slot]
,
[-]
Chapter 2
.
, or
[-] [+]
or [++]
[+]