Bootp; Management Programs - HP Surestore Tape Library Model 2/20 User Manual

Table 14
98 Configuring the Library

BOOTP

BOOTP is similar to DHCP, in that a BOOTP server dynamically assigns an IP
address to any BOOTP client that requests one. The difference is that your
system administrator must preconfigure the BOOTP server for the library. The
system administrator assigns a permanent IP address to the library's MAC
address. When the library is booted, the BOOTP server responds and assigns
the permanent address to the library. The IP address never expires and the
BOOTP server will not reissue the IP address to any other BOOTP client.

Management Programs

In addition to using your browser directly to manage your library, you can also
use popular management programs, such as HP OpenView, HP Top Tools, and
CA Unicenter TNG. In order to best use HP OpenView and CA Unicenter
TNG, you must download a plug-in from the HP Customer Care website at
http://www.hp.com/go/support. This plug-in can be easily installed in your
environment. HP Top Tools has built-in native support for your library, and no
plug-in is required.
Supported Configurations
Description
Browsers
Supported Configurations
Windows 95/98/2000/NT: Internet
Explorer™ 4.01 and higher, Netscape
Communicator™ 4.5 and higher, and
Netscape Navigator™ 4.08 and higher.
HP-UX: Netscape Communicator™ 4.5 and
higher and Netscape Navigator™ 4.08
and higher. Internet Explorer™ is not
supported.
Sun Solaris: Netscape Communicator™ 4.5
and higher and Netscape Navigator™
4.08 and higher. Internet Explorer™ and
HotJava™ are not supported.
Chapter 3