Priorities In The Colour Management Settings - Oce ColorWave 650 User Manual

Priorities in the colour management settings

Priorities in the colour management settings
When you want to print a document in colour on the Océ ColorWave 650 the colour
information that is defined in the files can be set in the different steps of the process from
document creation to document production. In order to get the best output results you
need to be aware of these methods to define the colour information of the document you
want to print.
The colour information that you can create in the various steps described below each
have a different priority. When you create a document that you want to print in colour,
the priority of the colour settings is also illustrated in the table below.
#
Stages in the process of making a colour print
Document
The colour settings are already embedded in the document (only appli-
cable for PDF files).
Application
The colour settings can be defined in the application that you use to
create or edit the document.
You can set the following parameters in the application.
•
Set colour or black and white.
• Define the input profile, RGB input data or CMYK input data.
(see 'What is an input profile / standardisation?' on page
You cannot define this for a PDF file.
•
Define the rendering intents.
(see 'Definition of rendering intents' on page
Note:
You can only overrule the colour settings of a PDF file with an
Adobe
Printer drivers
The Océ Windows
You can select the required colour management settings in the driver or
you can indicate to use the printer's default settings. Make sure the colour
settings do not conflict with the colour settings that may be set in another
stage of the process.
368 Chapter 8 - Print quality and Print productivity
®
application such Adobe Acrobat
®
Printer Driver offers colour management settings.
354)
359)
®
for example.
Priority
1
2
3