Switch The Finisher To Manual Operation And Back - Oce ColorWave 650 User Manual

Switch the finisher to manual operation and back

Introduction
The Estefold folder is integrated in the system.
You can use the Estefold folder also as a stand-alone folder.
Note:
For more information about the Estefold folder, see the separate operation manual of
the Estefold folder.
Online mode versus manual mode
The Estefold folder is connected to the rear of the printer. If you want to operate the
Estefold folder manually, the connecting part (to the printer) could cause a paper jam on
the table.
If you switch to manual mode, then the connecting part will move downwards to clear
the entrance for the paper.
#
Estefold Online mode
Switch the finisher to manual operation and back
Estefold manual mode
Chapter 4 - Configure the printing system 167