Set The 'Production Plus' Setting - Oce ColorWave 650 User Manual

Set the 'Production Plus' setting

Set the 'Production Plus' setting
Introduction
You can use the 'Production Plus' setting in the Océ Express WebTools to define how
the Océ ColorWave 650 must interpret the 'Production' 'Print Setting'.
Note:
The 'Production Plus' setting is available for print jobs and copy jobs.
Before you begin
This setting is editable for the Key operator or Power user.
How to set the 'Production Plus' setting
Click 'Preferences' - 'Print job defaults' or 'Preferences' - 'Copy job defaults'.
1.
Click 'Edit' in the 'Basic' bar or click the value of the 'Production Plus' setting.
2.
Select 'Production' for regular prints.
3.
Select 'Production Plus' if prints that are printed with the 'Production' print setting show
print artefacts that you want to reduce.
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.
4.
340 Chapter 8 - Print quality and Print productivity