Oce ColorWave 650 User Manual page 61

Action
12 The printer user panel now displays the network set-
tings.
Record the IP address (for example, 134.188.26.173).
You need this IP address to access the 'Océ Express
WebTools' later in order to complete the printer con-
figuration.
Use the 'Upper right softkey' to finish the network in-
stallation procedure and to continue with the printer
installation.
13 The following message is displayed:
'Place the cyan toner cartridge'
A comparable message is displayed for all other car-
tridges.
Follow the steps as indicated in the wizard to complete
the installation of the printer.
For more information about specific steps please refer
to the following sections.
'Load or replace a toner cartridge' on page 188
'Replace the maintenance tray' on page 191
14 If the toner cartridges are placed correctly, the following
message is displayed:
'The installation procedure continues when the printer
is warm'.
This procedure takes several minutes.
15 After warming up, open media drawer 1.
'Load the supplied installation media on roll 1'
(see 'Load a media roll' on page
Note:
Only roll position 1 can be used for calibra-
tions. You must use a media roll with size A0
or larger.
Note:
Use Océ 'Media' for reliable calibrations
(LFM090, A0 or larger).
313)
Chapter 3 - Prepare the printing system for use and get started
Run the installation wizard from the user panel
Illustration
61