Scanner Accounting - Oce ColorWave 650 User Manual

Scanner accounting

Scanner accounting
Introduction
If the setting 'Force entry of accounting data for copy and scan jobs' is set to 'On', the
'Scanner accounting' tab in the Océ Express WebTools allows you to unlock the scanner
for copying or scan to file. Valid accounting information is required to unlock the scanner.
Default you need no accounting information to start the scanner.
Note:
Before you can edit a setting or a settings group, you must be logged on as a Key operator
or Power user.
Enable 'Scanner accounting'
Click 'Preferences' - 'System defaults' - 'Job management'.
1.
Change the value of 'Force entry of accounting data for copy and scan jobs' to 'On'.
2.
When 'On', it will only be possible to start a copy or scan-to-file job when valid accounting
data is entered.
The following 'Scanner accounting' settings are now valid:
#
Setting
'Scanner locking: at
panel time-out'
'Scanner unlock-
ing: location'
'Scanner unlocking
location: single
host'
Description
When 'Enabled', the scanner will lock when the scanner operator
panel time-out expires.
Scanner locking and unlocking can be done from any host or
a single host only.
When set to 'From any host', accounting fields can be filled in
from any host to unlock the scanner.
When set to 'From single host', a single host can be specified
from which the scanner can be unlocked.
The hostname or IP-address from which accounting fields can
be entered to unlock the scanner.
Only valid when 'Scanner unlocking: location' has value 'From
single host'.
Chapter 6 - Use the Océ TC4 scanner
Scanner accounting
259