Oce ColorWave 650 User Manual page 38

Introduction to the take-up unit
2
3
4
5
6
7
8
9
38 Chapter 2 - Get to know the printing system
Part
Flanges
Core
Scroller assy
Manual feed but-
ton
Take-up direction
switch
Power switch
Sensor
Positioning devices
Description
The flanges make sure that your prints are wound up
correctly.
The core
The scroller assy holds the core on which you can wind
your prints
The manual feed button allows you wind up manually.
With this switch you choose the winding direction:
• Reverse (your prints are winded print-side out).
• Forward (your prints are winded print-side in)
The power switch
The take-up unit can only operate when the power
switch is in the 'I' position.
The sensor enables the automatic take-up of your
prints.
The positioning devices connect the printer to the take-
up unit.
turns the take-up unit on and off.