Oce ColorWave 650 User Manual page 138

Hide thumbs Also See for ColorWave 650:
Table of Contents

Advertisement

Set the default print job settings
#
Setting
'Media source'
'Media selection policy'
'Print cut method'
'Custom print length'
'Add leading strip'
138
Chapter 4 - Configure the printing system
Description
The 'Media source' setting can be used to select the default
output material and format. The 'System' screen of the
printer user panel will show you what rolls are currently
loaded.
You can select 'Automatic' or you can select a specific roll
number that the Océ ColorWave 650 must use by default.
If you select 'Media source': 'Automatic' you can also set
the 'Media selection policy' setting.
When you select 'Automatic next larger' the printer auto-
matically selects the media roll with the exact media size
for your print job. If the media roll with the exact media
size is not available the next larger media roll on the printer
is selected.
Note: for media widths larger than 36" (914 mm) the
printer runs at a slightly lower speed in Economy mode.
Because the images are processed accordingly, the printer
will in Economy mode not be able to automatically select
a media roll wider than 36" for jobs that are processed for
a media roll smaller than or equal to 36". To print such a
job on wide media, the job needs to be reprinted from the
Smart Inbox.
When you select 'Automatic exact fit' the printer automat-
ically selects the media roll with the exact media size for
your print job. If the media roll with the exact media size
is not available a media request pops up.
Select 'Standard' to cut the print to a standard media
size (DIN, ANSI, ...)
Select 'Synchro' to cut the print at the end of the image.
The system cuts at the measured length of the original
times the scale factor.
Select 'Custom' (numeric) to cut the print on a specified
length. The print length is defined by value of the setting
'Custom print length'.
Print length if the 'Print cut method' is set to 'Custom'.
When you enter a value, the Océ ColorWave 650 adds a
blank strip of the specified length at the beginning of the
output.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents