Oce ColorWave 650 User Manual page 339

Setting
'Presentation'
Before you begin
This setting is editable for the Key operator or Power user.
How to set the 'Print setting for scanned images'
Click 'Preferences' - 'Scan job defaults'
1.
Click 'Edit' in the 'General scan job settings' bar or click the value of the 'Print setting
2.
for scanned images' setting.
Select 'Automatic printmode' for the best balance between print quality and print speed.
3.
Select 'Economy' if the print productivity is the most important factor.
Select 'Production' for high productivity of good quality prints.
Select 'Presentation' if the print quality is the most important factor.
Click 'Ok' to confirm your entries or 'Cancel' to reject your entries.
4.
Description
You can use the 'Presentation''Print Setting' for excellent quality
printing of high coverage area prints (3D-CAD, Posters, Photo's).
The print speed is around 3 minutes per A0.
Typical example of a file that can be printed with the 'Presenta-
tion''Print Setting':
Chapter 8 - Print quality and Print productivity
Set the 'Print setting for scanned images'
339