Fold Settings - Oce ColorWave 650 User Manual

Fold settings

Introduction
When you set the fold options, there are some definitions you must know to operate the
folder in a correct way. Below you will find an overview of these settings.
Settings
#
'Fold package'
'Full fold'
'Fanfold only'
#
'Reinforcement'
'Enabled'
'Disabled'
Description
Folded with first (Z-fold) and
second fold (crossfold).
Folded only with the first fold
(Z-fold).
Description
Glues the pre-punched strips to
the backside of the folded pack-
age.
Note:
Only possible when
'Folding method' is
'With same size back'.
No glued strip.
Chapter 4 - Configure the printing system
Fold settings
Example
279 mm / 11 inch
or
305 mm / 12 inch
180 - 210 mm
7.1 - 8.3 inch
Example
193 - 198 mm
7.6 - 7.8 inch
145