Load A Media Roll - Oce ColorWave 650 User Manual

Load a media roll

How to load a media roll
Attention:
Do not use dented media rolls to prevent damage to the imaging devices.
Attention:
Do not open the media drawer during the print process. When the last print is delivered,
wait until the status light on the printer user panel stops blinking, before you open the
media drawer.
Attention:
Do not open more than one media drawer at the same time to prevent overbalance of
the printer.
Attention:
It is very important to select the media type with the correct media code (for example
LFM090). You can find the media code of the new media roll on the sticker on media
box. The media code represents a specific media profile that the Océ ColorWave 650
uses to optimise the printed output for the corresponding media type. If the correct media
code is not available on your printer user panel, you must first make a new media profile
available on the printer user panel. (see
user panel' on page
Attention:
When you unpack a media roll, always write the correct media name and media code
inside the core. In that case, if you replace a media roll before it is empty and you want
to re-use the media roll later, you will have the correct media information available.
Caution:
Watch your fingers when you handle the media roll.
323)
'Make a new media profile available on the printer
Chapter 5 - Use the printing system
Load a media roll
177