Load The Settings From A File - Oce ColorWave 650 User Manual

Load the settings from a file

Load the settings from a file
Purpose
Load the settings and the values for the Océ Express WebTools from a file.
When to do
• Duplicate the settings to another printer of the same type.
Attention:
When you are logged in as a Key operator you can only load the Key operator settings.
When you are logged in as a System administrator you can only load the System admin-
istrator settings. To load all the settings that are stored in the file you must log in as a
Power user.
Note:
Not all settings are stored in the settings file. The network settings are excluded from
the file because the network settings can not be duplicated to another printer. The
passwords for authorised users and the passwords for remote scan destinations are excluded
from the file for security reasons. License information is not included in the file either.
How to load the settings from a file
Click the 'Configuration' tab or the 'Preferences' tab.
1.
Click 'Open set' in the top-right hand corner of the screen. A secondary window is
2.
opened.
Navigate to a location on the network and select the settings file.
3.
Click 'Ok' to load the settings file or 'Cancel' to close the window without loading the
4.
settings file.
In some cases a reboot dialogue will appear.
Result
The values of the settings in the settings file overwrite the current values. The network
configuration settings of the system and the passwords are not restored to prevent connec-
tivity problems and to guarantee the integrity of the passwords.
100 Chapter 4 - Configure the printing system