Table of Contents
Advertisement
Configure the regional settings of the Océ ColorWave 650
Configure the regional settings of the Océ ColorWave 650
Purpose
The regional settings are configured during the installation of your Océ ColorWave 650.
If you want to change the initial configuration, you can do so in the 'Regional settings'.
Define the regional settings for the printer in the following order.
•
'First language' and 'Second language' of the printer user panel
•
'Measurement unit'
•
'Time zone'
If you change the 'Time zone' you must first reboot the system, before you set the
'Current date and time'.
•
'Current date and time'
•
'Time format'
Note:
Every time you change the 'Measurement unit', the controller recalculates the values
from millimetre to inches and vice versa. If you reverse to the original value of this setting
a slight calculation difference can occur due to rounding differences.
How to define the regional settings
Select 'Preferences' - 'System defaults'.
1.
Click 'Edit' in the 'Regional settings' bar or click the value of the setting you want to
2.
edit, for example 'First language'.
Modify the settings. You can choose between:
3.
•
settings that are commonly used in the USA
•
or settings that are commonly used in the rest of the world.
Click 'Ok' to confirm you entries or 'Cancel' to reject your entries.
4.
124
Chapter 4 - Configure the printing system
Hide quick links:
Advertisement
Table of Contents
